Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
by Jinge on 2023-03-08
Steel plate clamps are divided into "horizontal hanging" and "vertical hanging". They explain the opening direction and use direction of steel plate clamps, but they do not make clear regulations on the lifting operation direction of steel plate clamps. Therefore, the horizontal hanging steel plate crane can also perform vertical operations, but the following points need to be paid attention to during the operation.
1. Steel plate clamps need to be used in pairs. The opening directions of the horizontal steel plate clamps are all left or right, so only a single steel plate clamp cannot complete the fixing work of the steel plate during the lifting work, so no less than two steel plate clamps should be used Fix it with clamps on the left and right sides of the steel plate.
2. The steel plate clamps used in pairs should be equal to each other. The equality here does not only refer to the equality of lifting angle and lifting height, but also includes the same load and stability coefficient between the steel plate clamps. .
3. In order to ensure that the lifting operation can be carried out smoothly, the steel plate tongs can only lift one steel plate at a time to prevent a series of problems such as falling of the steel plate due to loose jaws.
The opening direction of the horizontal hanging steel plate lifting clamp is "horizontal", which can carry out vertical or horizontal lifting work, but it cannot be used tilted. If tilting occurs, temporarily loosen the tightening bolts to correct the tilted state of the main body, and then reinstall the steel plate clamp.
