Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
by Jinge on 2023-03-08
steel plate tongs, as the name suggests, are a tool for lifting steel plate objects. Before there were no steel plate tongs, steel plate lifting was unstable and prone to danger. After the appearance of steel plate clamps, it not only increased the stability factor of steel plate lifting, but also improved our work efficiency, saving manpower, material and financial resources. This steel plate tongs is a great breakthrough in steel plate lifting. Just because steel plate clamps have such a heavy responsibility, the following "five taboos" used by steel plate clamps must never be touched.
1. It is forbidden to overload the steel plate tongs. Before use, make preparations and check whether the weight of the lifting steel plate is within the load range of the steel plate lifting clamp.
Second, the steel plate tongs are not allowed to lift two steel plates at the same time, and the steel plate tongs should be used within the allowable plate thickness.
3. During the lifting process, do not go up and down quickly, and should keep rising at a constant speed, otherwise it is easy to cause the steel plate to fall.
Fourth, when using the steel plate clamp to clamp the steel plate, the suspended object must not be unstable or tilted. Therefore, for the sake of stability, try to use more than two steel plate clamps.
Fifth, scrappedsteel plate tongs must not be used any more.
Since "taboo" is used to describe the above five precautions, its danger can be seen, so the majority of users of steel plate tongs should pay attention and must not be ignored.
