Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
by Jinge on 2023-03-08
What is the MV wire puller made of? What does it do?
As a kind of lifting pliers, MV wire pulling clamp is a kind of wire pulling clamp with damping effect, simple structure, high reliability and long service life.
There is a sealing cavity at one end of the pliers body, and a clamp seat at the other end. There is a pull rod in the sealing cavity. One end of the pull rod passes through the sealing cavity to connect with the slider, and the other end passes through the sealing cavity to connect with the balance seat. The pull rod in the sealing cavity is covered with a The compression spring has a gas channel on the sealed cavity.
Working principle: There are guide rails on both sides of the slider. The two sides of the pliers body are respectively hinged with support plates, one end of each support plate is hinged with the same side of the clamp seat, the other end of each side support plate is connected with the slider through a guide post, and each side of the support plate has a connecting rod , one end of the connecting rod is hinged to the clamp seat on the same side, and the other end is hinged to the clamp body, and a quadrilateral structure is formed among the connecting rod, the clamp seat, the support plate and the clamp body. The pull rod is subjected to a damping effect, which can reduce the damage to various parts caused by the impact force in the working process, improve the service life, and reduce the production cost.
The MV wire pulling clamp is used to clean the residual copper wire in the motor, the load is 0.6T, and the opening size is 0-80mm, which is used for lifting and cleaning the copper wire.
