by Jinge on 2023-03-08
1. You must be familiar with the operating procedures of this product before using the horizontal hanging steel plate clamp.
2. Before use, check the wear and deformation of the hoisting, and record the inspection results in the inspection record. The hoisting shall be free from harmful defects such as cracks, sharp angles, burrs, corrosion, warping and torsion. Whether the rotation of all its rotating parts is flexible or not, the fasteners cannot be loosened. If the section of the stressed member is worn or corroded to 10% of the original size or the jaw opening is increased by 10% compared to the original size, it must be scrapped and not used.
3. Horizontal hanging steel plate tongs can only be used for horizontal lifting of steel plates, and other uses are strictly prohibited.
4. According to the length and width of the steel plate and the lamination situation, different horizontal hanging steel plate clamps should be selected. If you want to lift multiple long iron plates, you must use steel plate tongs with fixed beams. For hoisting short or single steel plates, unfixed steel plate clamps can be used. No matter what kind of steel plate lifting pliers are used, they are only allowed to be used in pairs, and the thickness of the lifting steel plate cannot exceed the specified thickness of the jaws.
5. It is strictly forbidden to lift from above the personnel. Do not collide with other objects during lifting. The lifter must assist the crane driver in reminding the personnel of the moving direction of the object to avoid injury accidents.
6. No matter what kind of steel plate clamps are allowed to exceed the rated load. (That is, the rated load refers to the allowable lifting weight when the steel plate clamp is used in pairs when the angle between the lifting points is 60°)
7. No matter what kind of steel plate lifting clamp, it must be clamped in place according to the instructions and regulations, and it can be lifted only after it is confirmed that it is locked.