Product introduction:

　　Hand-pulled monorail crane is driven by bracelet, walking on the lower edge of I-beam track, and equipped with chain block to form bridge crane, single beam crane or cantilever crane. It is widely used in construction sites, etc. When monorail trolley is used to install machinery and equipment and lift goods, monorail trolley is especially suitable for operation in places without power supply. The applicable tonnage mainly includes: 0.5t, 1t, 2t, 3t, 5t, 10t, 20t and 30t. 50T. The monorail trolley is compact in structure and small in installation size. The wheel spacing of monorail trolley is convenient to adjust, and it is suitable for various I-beams. The left and right wallboards of monorail trolley are hinged, and under the action of gravity, the height can be adjusted by itself, so that the four wheels are stressed evenly. The monorail trolley has high transmission efficiency, small hand pull, and can drive on a curve with a small turning radius.

　　Usage specification:

　　1. It is forbidden to overload monorail trolley.

　　2. When monorail trolley is lifting heavy objects, it is forbidden for anyone to walk or work under heavy objects.

　　3. When the monorail trolley lifts heavy objects, its center of gravity should be in the plane of the I-beam web, otherwise, please do not lift the monorail trolley. When operating, the hand zipper strip should be stressed in the center plane of the hand sprocket, and it is not allowed to stay.

　　4. In case of abnormal hand pull, the monorail trolley must not be yanked, and should be stopped immediately to check the reason.

　　5. The monorail trolley gear and rail surface should be lubricated regularly, and all fasteners should be checked for looseness at the same time.

　　6. Hand-pulled monorail trolley works with I-beam as support, so I-beam which is deformed, twisted, cracked or not up to standard and has other defects cannot be used as monorail trolley.