Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
by Jinge on 2023-03-08
When using steel plate clamps, it is very important to be stable and free of disasters. In addition, in order to improve work efficiency and the service life of steel plate clamps and reduce costs. Therefore, before and after the use of steel plate clamps, the management and inspection of steel plate clamps must be done well.
1. Separately manage indoors according to purpose
After using the steel plate clamps, do not place the steel plate clamps outdoors and must be sorted out according to the purpose and managed.
2. Regular inspection and maintenance
Before and after using the steel plate clamp, be sure to check to ensure that the steel plate clamp is in good condition. The inspection and maintenance of the steel plate clamp must be carried out once a month, regardless of the number of times of work. During the inspection and maintenance process, please give the steel plate Oil the tongs.
3. It is strictly forbidden to use dangerous steel plate clamps
If a deformed or damaged steel plate clamp is found, it must be prohibited from being used, and the parts must be replaced immediately. When starting to work, please be sure to check the inspection label.
4. It is recommended to replace parts early
It is quite dangerous to use replaceable parts to their limit. For the scene where the hanging objects with high hardness or the same steel plate are handled, the cam and screw jaw must be replaced in advance.
The above four points must be done before and after the use of the steel plate clamp, and must not be negligent and cause unnecessary safety hazards.
