Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
by Jinge on 2023-03-08
Before hoisting the steel plate with the steel plate tongs, a thorough inspection should be carried out. If the steel plate tongs is severely worn, it needs to be replaced with a new steel plate clamp to avoid accidents during lifting. So, how do we avoid wear and tear when using steel plate tongs? Let me explain it to you one by one.
1. When you use the steel plate tongs to lift the steel plate, you must pay attention to carefully check whether the models and specifications between the two are consistent, and replace them in time if they do not match.
2. When hoisting steel plates, please try to ensure that the weight of all steel plates is within the rated load range of the steel plate tongs, and overloading is strictly prohibited.
3. The hardness of the steel plate to be hoisted should not be too high. When the steel plate with high hardness is hoisted, it will cause damage to the jaws of the steel plate tongs, and the steel plate may slip, causing danger.
4. Ensure that the surface of the steel plate is clean and tidy as a whole, especially the part in contact with the caliper body, to avoid wear and tear.
5. Clean up the surrounding working environment to ensure that there are no obstacles in the working environment to bump the pliers, which will cause wear of the pliers and affect the normal use of the steel plate hanging pliers.
The wear and tear of the ssteel plate tongs will directly affect its stability and service life, so please pay attention to the above points when using it to avoid damage to the steel plate tongs.
