Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
Hebei Jinge Hoisting Machinery
Manufacturing Co. Ltd.
by Jinge on 2023-03-08
Steel plate tongs are quite flexible in use, that is, they can be used as lifting tongs to lift steel plates, and can also be used as clamps to clamp and transport steel plates. When the steel plate clamp is used as a clamp for hanging, the direction or load may be changed repeatedly during use, unlike the use for lifting or conveying. Due to the reduction of the clamping force of the clamp or the change of the clamping position, dangerous accidents such as falling off may occur. Therefore, special reminders to the majority of users in the use of precautions.
1. The steel plate tongs used must have a fixed fulcrum when hoisting. When used for hook work or handling work, it can be used as a hoist
tool, and the hook book clamp can also be used as a spreader;
2. It is strictly forbidden to use in the direction of the opening where the clamp is pulled out, and the two lifting holes on the steel clamp cannot be used at the same time;
3. It is strictly forbidden to use it on hoists and other devices that are prone to impact loads or changing load directions;
4. It is strictly forbidden to use steel plate clamps that cannot determine the clamping state and are difficult to perform clamping work or handles;
5. It should be used according to the standards of lifting load and plate thickness.
Therefore, when the steel plate clamp is used as a hanging fixture, it must be used in a standardized manner, and it should be used correctly to avoid accidents.
